Trek Mountain frame

Trek Slash Size Chart

Slash 8 Gen 6 runs S to XL in five sizes, including the ML step between M and L. Trek prints rider height and inseam for every size, and stack, reach, and standover in the geometry table. That table starts at M on the product page, so the S row comes from the sizing data the same page loads.

Frame sizes
S–XL · 5 sizes
Rider height
5'1"–6'5"
Height (cm)
155–195 cm
Stack / reach · M
623 / 448 mm

Slash 8 Gen 6 size finder

Which Slash 8 Gen 6 size covers your height?

Height gives you one size, or two when the published height ranges overlap. Stack, reach, and standover settle the overlap.

ft
in

Enter your height and the Slash 8 Gen 6 size that covers it is marked in the tables below.

How to measureHeight gives the starting size. Standover and reach confirm it.

Height ranges

Where each size starts and ends

Height ranges for every Slash 8 Gen 6 size, 151 to 199 cm overall. S: 155 to 165 cm. M: 165 to 177 cm. ML: 173 to 180 cm. L: 177 to 188 cm. XL: 188 to 195 cm.

  1. S155–165 cm
  2. M165–177 cm
  3. ML173–180 cm
  4. L177–188 cm
  5. XL188–195 cm
151 cm199 cm

Size chart

Slash 8 Gen 6 size by height

Rider height and inseam are the ranges Trek prints beside each size. The inseam row is Trek's own, not a brand-wide chart.

S

5'1"–5'5"

155–165 cm

Inseam 74–78 cm

Lowest standover at 727 mm, 39 mm below M. Trek's geometry table starts at M; this row comes from the sizing data behind the page. The inseam range is 29–31 inches.

M

5'5"–5'10"

165–177 cm

Inseam 79–83 cm

Stack and reach above are for this size. Standover adds 39 mm over S.

ML

5'8"–5'11"

173–180 cm

Inseam 81–86 cm

Reach adds 20 mm over M while stack adds 9 mm.

L

5'10"–6'2"

177–188 cm

Inseam 84–89 cm

Standover is 1 mm above ML.

XL

6'2"–6'5"

188–195 cm

Inseam 89–91 cm

Reach adds 25 mm over L and stack adds 18 mm.

Start with height. If two sizes overlap, use cycling inseam to choose.How to measure

Geometry

Slash 8 Gen 6 geometry by size

Stack, reach, and standover for every Slash 8 Gen 6 size, read from Trek's geometry table. Standover is Trek's standover figure, a frame measurement.

These numbers describe the 2026 Slash 8 Gen 6. Check the year on the frame before you use them, because one model name covers more than one model year.

S

5'1"–5'5"

Stack
588 mm
Reach
430 mm
Standover
727 mm

M

5'5"–5'10"

Stack
623 mm
Reach
448 mm
Standover
766 mm

ML

5'8"–5'11"

Stack
632 mm
Reach
468 mm
Standover
766 mm

L

5'10"–6'2"

Stack
641 mm
Reach
488 mm
Standover
767 mm

XL

6'2"–6'5"

Stack
659 mm
Reach
513 mm
Standover
768 mm
Stack and reach by sizeStackReachBoth bars use a 0–700 mm scale
  1. S5'1"–5'5"

    Stack588 mm
    Reach430 mm
  2. M5'5"–5'10"

    Stack623 mm
    Reach448 mm
  3. ML5'8"–5'11"

    Stack632 mm
    Reach468 mm
  4. L5'10"–6'2"

    Stack641 mm
    Reach488 mm
  5. XL6'2"–6'5"

    Stack659 mm
    Reach513 mm

How neighboring sizes compare

If two sizes both fit, compare reach and standover rather than assuming the larger size is more comfortable.

How to measure a bike frame
  1. S → M+35 mm+18 mm+39 mm
  2. M → ML+9 mm+20 mm0 mm
  3. ML → L+9 mm+20 mm+1 mm
  4. L → XL+18 mm+25 mm+1 mm

Standover clearance by size

Trek publishes an inseam band for each size. The table takes the low end of that band and subtracts the frame's standover, so it shows what the shortest rider in the band has left to stand over.

  1. S74–78 cm727 mm13 mm
  2. M79–83 cm766 mm24 mm
  3. ML81–86 cm766 mm44 mm
  4. L84–89 cm767 mm73 mm
  5. XL89–91 cm768 mm122 mm

Clearance runs from 13 mm at size S to 122 mm at size XL.

If you are between sizes

165 cm sits in S and in M

M adds 39 mm of standover over S, 35 mm of stack, and 18 mm of reach. Take M for the higher front end and S to keep the standover low.

173–177 cm sits in M and in ML

ML reaches 20 mm further and stacks 9 mm higher, with the same 766 mm standover. Take ML when the M cockpit feels short.

188 cm closes L and opens XL

XL adds 25 mm of reach, 18 mm of stack, and 1 mm of standover. It is the largest reach step in the table.

Beyond this model

Same height, other Trek mountain bikes

This page answers the Slash 8 Gen 6 size. The calculator checks your height and inseam against every Trek mountain model we cover, so you can see whether another frame fits you better.

Compare other models

Sizing notes

Why height alone is not enough

Riders with the same height can need different sizes because inseam, torso length, flexibility, and preferred handling differ.

3 checks

  1. Stack grows 71 mm from S to XL while reach grows 83 mm, so the frame lengthens slightly faster than the front end rises.

  2. Standover climbs 41 mm across the table, and 39 of it happens at the first step: 727 mm at S, then 766, 766, 767, and 768 mm.

  3. The height ranges overlap on purpose: 165 cm sits at the top of S and the bottom of M, 173–177 cm sits in M and ML, and 188 cm closes L and opens XL.

Sources

Confirm the exact bike after you have a starting size

Every number on this page comes from the sources below. Check the exact model year there before you buy.

Data reviewed:

Compare

Compare before buying

A size label does not mean the same thing across brands. Compare published geometry before you choose.

Related guides

More Trek and mountain sizing

Once you have a starting size, compare this frame against the Trek chart and the mountain guide.

Trek bike size chart

Compare Slash 8 Gen 6 against broader Trek size guidance.

Read

Mountain bike size chart

Check mountain sizing by height and inseam before choosing a frame.

Read

Questions

Slash 8 Gen 6 size chart FAQ

Short answers for Trek Slash 8 Gen 6 sizing.

What size Trek Slash should I ride?

Start with Trek's height range. S covers 155–165 cm, M 165–177 cm, ML 173–180 cm, L 177–188 cm, and XL 188–195 cm.

What size Slash fits a 180 cm rider?

180 cm sits at the top of ML and inside L. ML carries 632 mm of stack and 468 mm of reach; L carries 641 mm and 488 mm.

Why does Trek publish an ML size?

ML sits between M and L: 20 mm more reach than M and 20 mm less than L. Its standover is the same 766 mm as M.

How much standover does the Slash have?

727 mm at S, 766 mm at M and ML, 767 mm at L, and 768 mm at XL. The step from S to M is 39 mm; from M upward the table moves by 0 or 1 mm.

Does Trek publish a rider inseam for the Slash?

Yes. Trek prints an inseam range beside each size alongside rider height. The S row starts at 29 inches and the chart rises with the frame.

Does this chart cover every Slash build?

The numbers come from the Slash 8 Gen 6, the build whose table Trek publishes. The geometry belongs to the frame, so read that table for the build you are buying.