Cannondale Mountain frame

Cannondale Trail Size Chart

Trail 8 runs XS to XL in five sizes, and the wheel size changes with the frame: XS and SM roll on 27.5-inch wheels, MD to XL on 29-inch. Cannondale publishes the geometry as an image on the product page and gives the rider height range in the size calculator beside the size list.

Frame sizes
XS–XL · 5 sizes
Rider height
4'6"–6'3"
Height (cm)
137–191 cm
Stack / reach · MD
623 / 425 mm

Trail 8 size finder

Which Trail 8 size covers your height?

Height gives you one size, or two when the published height ranges overlap. Stack, reach, and standover settle the overlap.

ft
in

Enter your height and the Trail 8 size that covers it is marked in the tables below.

How to measureHeight gives the starting size. Standover and reach confirm it.

Height ranges

Where each size starts and ends

Height ranges for every Trail 8 size, 133 to 195 cm overall. XS: 137 to 157 cm. SM: 155 to 163 cm. MD: 160 to 173 cm. LG: 170 to 183 cm. XL: 183 to 191 cm.

  1. XS137–157 cm
  2. SM155–163 cm
  3. MD160–173 cm
  4. LG170–183 cm
  5. XL183–191 cm
133 cm195 cm

Size chart

Trail 8 size by height

Rider height is the range Cannondale's size calculator prints for each size. The centimetres in the table are the calculator's conversion of the published inch range.

XS

4'6"–5'2"

137–157 cm

Lowest stack at 573 mm and the lowest standover at 673 mm. Runs on 27.5-inch wheels.

SM

5'1"–5'4"

155–163 cm

Stack adds 18 mm over XS and reach adds 37 mm, the largest reach step in the table. Also 27.5-inch wheels.

MD

5'3"–5'8"

160–173 cm

Stack and reach above are for this size. The first size on 29-inch wheels.

LG

5'7"–6'0"

170–183 cm

Standover adds 27 mm over MD and stack adds 9 mm.

XL

6'0"–6'3"

183–191 cm

Longest reach at 469 mm and the highest standover at 839 mm.

Start with height. If two sizes overlap, use cycling inseam to choose.How to measure

Geometry

Trail 8 geometry by size

Stack, reach, and standover for every Trail 8 size, read from the geometry table on Cannondale's product page. Cannondale publishes that table as an image, so these numbers were read from the image.

These numbers describe the 2026 Trail 8. Check the year on the frame before you use them, because one model name covers more than one model year.

XS

4'6"–5'2"

Stack
573 mm
Reach
365 mm
Standover
673 mm

SM

5'1"–5'4"

Stack
591 mm
Reach
402 mm
Standover
710 mm

MD

5'3"–5'8"

Stack
623 mm
Reach
425 mm
Standover
768 mm

LG

5'7"–6'0"

Stack
632 mm
Reach
447 mm
Standover
795 mm

XL

6'0"–6'3"

Stack
641 mm
Reach
469 mm
Standover
839 mm
Stack and reach by sizeStackReachBoth bars use a 0–650 mm scale
  1. XS4'6"–5'2"

    Stack573 mm
    Reach365 mm
  2. SM5'1"–5'4"

    Stack591 mm
    Reach402 mm
  3. MD5'3"–5'8"

    Stack623 mm
    Reach425 mm
  4. LG5'7"–6'0"

    Stack632 mm
    Reach447 mm
  5. XL6'0"–6'3"

    Stack641 mm
    Reach469 mm

How neighboring sizes compare

If two sizes both fit, compare reach and standover rather than assuming the larger size is more comfortable.

How to measure a bike frame
  1. XS → SM+18 mm+37 mm+37 mm
  2. SM → MD+32 mm+23 mm+58 mm
  3. MD → LG+9 mm+22 mm+27 mm
  4. LG → XL+9 mm+22 mm+44 mm

If you are between sizes

155 cm sits in XS and in SM

XS covers 137–157 cm and SM starts at 155 cm. SM reaches 37 mm further and stands 37 mm taller, so take SM for the longer cockpit and XS to keep the standover low.

170–173 cm sits in MD and in LG

LG adds 9 mm of stack and 22 mm of reach over MD, with 27 mm more standover. Both sizes run on 29-inch wheels, so the frame is the only difference.

183 cm closes LG and opens XL

XL carries 641 mm of stack and 469 mm of reach, 9 mm and 22 mm above LG. Standover rises 44 mm, from 795 mm to 839 mm.

Beyond this model

Same height, other Cannondale mountain bikes

This page answers the Trail 8 size. The calculator checks your height and inseam against every Cannondale mountain model we cover, so you can see whether another frame fits you better.

Compare other models

Sizing notes

Why height alone is not enough

Riders with the same height can need different sizes because inseam, torso length, flexibility, and preferred handling differ.

3 checks

  1. Reach grows 104 mm from XS to XL while stack grows 68 mm, so the frame lengthens faster than the front end rises.

  2. Standover climbs 166 mm across the table, from 673 mm at XS to 839 mm at XL, and the largest step is 58 mm from SM to MD.

  3. The table crosses two wheel sizes: XS and SM use 27.5-inch wheels, MD to XL use 29-inch, and the standover and bottom bracket height step at that boundary.

Sources

Confirm the exact bike after you have a starting size

Every number on this page comes from the sources below. Check the exact model year there before you buy.

Data reviewed:

Compare

Compare before buying

A size label does not mean the same thing across brands. Compare published geometry before you choose.

Related guides

More Cannondale and mountain sizing

Once you have a starting size, compare this frame against the Cannondale chart and the mountain guide.

Cannondale bike size chart

Compare Trail 8 against broader Cannondale size guidance.

Read

Mountain bike size chart

Check mountain sizing by height and inseam before choosing a frame.

Read

Questions

Trail 8 size chart FAQ

Short answers for Cannondale Trail 8 sizing.

What size Cannondale Trail should I ride?

Start with the range in Cannondale's size calculator. XS covers 137–157 cm, SM 155–163 cm, MD 160–173 cm, LG 170–183 cm, and XL 183–191 cm.

What size Trail 8 fits a 165 cm rider?

165 cm sits inside MD, which covers 160–173 cm. MD carries 623 mm of stack, 425 mm of reach, and 768 mm of standover.

Where do the geometry numbers come from?

Cannondale publishes the geometry table as an image on the product page rather than as text. The stack, reach, and standover figures here were read from that image, and the height ranges come from the size calculator beside the size list.

Which sizes use 27.5-inch wheels?

XS and SM. MD, LG, and XL use 29-inch wheels. The frame geometry changes at the same boundary, so read the row for your size rather than scaling from a smaller one.

How much does standover change across the Trail range?

166 mm, from 673 mm at XS to 839 mm at XL. The largest single step is 58 mm from SM to MD, where the wheel size changes.

Does this chart cover the Trail 5?

The geometry table on the Trail 8 page is the Trail 5 and Trail 8 table, so the frame numbers match. Read the build you are buying for its own parts and price.