Specialized Mountain frame

Specialized Enduro Size Chart

Enduro Comp runs S2 to S5 in the four sizes on this page. Specialized publishes stack and reach for each one and no standover for the frame, so the standover column here reads a dash.

Frame sizes
S2–S5 cm · 4 sizes
Rider height
5'2"–6'4"
Height (cm)
158–193 cm
Stack / reach · S3
620 / 464 mm

Enduro size finder

Which Enduro size covers your height?

Height gives you one size, or two when the published height ranges overlap. Stack, reach, and standover settle the overlap.

ft
in

Enter your height and the Enduro size that covers it is marked in the tables below.

How to measureHeight gives the starting size. Standover and reach confirm it.

Height ranges

Where each size starts and ends

Height ranges for every Enduro size, 154 to 197 cm overall. S2: 158 to 173 cm. S3: 165 to 180 cm. S4: 173 to 188 cm. S5: 178 to 193 cm.

  1. S2158–173 cm
  2. S3165–180 cm
  3. S4173–188 cm
  4. S5178–193 cm
154 cm197 cm

Size chart

Enduro size by height

Rider height is the S-Sizing range Specialized publishes for the Enduro. Specialized publishes no rider inseam for this frame, so the table shows height only.

S2

5'2"–5'8"

158–173 cm

Smallest size, with 616 mm of stack and 437 mm of reach.

S3

5'5"–5'11"

165–180 cm

Stack and reach above are for this size. Reach adds 27 mm over S2, the largest reach step in the table.

S4

5'8"–6'2"

173–188 cm

Reach adds 23 mm over S3 while stack adds 9 mm.

S5

5'10"–6'4"

178–193 cm

Reach adds 24 mm over S4 and stack adds 9 mm.

Start with height. If two sizes overlap, use cycling inseam to choose.How to measure

Enduro trims

Enduro builds that publish this table

Enduro Comp and Enduro Pro publish the same S2 to S5 stack and reach. The build kit changes; the fit does not.

Enduro Comp 4276011

Sizes: S2, S3, S4, S5

The build these numbers were read from. S3 carries 620 mm of stack and 464 mm of reach.

Enduro Pro 4276010

Sizes: S2, S3, S4, S5

Publishes the same S2 to S5 table and the same 620 mm of stack at S3.

Geometry

Enduro geometry by size

Stack and reach for every Enduro Comp size, read from Specialized's geometry table. Specialized publishes both in the low bottom-bracket position only, so this table reads that position. Specialized publishes no standover figure for this frame, so the standover column shows a dash.

These numbers describe the Enduro Comp as Specialized sells it today. The page prints no model year, so check the year on the frame before you use them.

S2

5'2"–5'8"

Stack
616 mm
Reach
437 mm
Standover
—

S3

5'5"–5'11"

Stack
620 mm
Reach
464 mm
Standover
—

S4

5'8"–6'2"

Stack
629 mm
Reach
487 mm
Standover
—

S5

5'10"–6'4"

Stack
638 mm
Reach
511 mm
Standover
—
Stack and reach by sizeStackReachBoth bars use a 0–650 mm scale
  1. S25'2"–5'8"

    Stack616 mm
    Reach437 mm
  2. S35'5"–5'11"

    Stack620 mm
    Reach464 mm
  3. S45'8"–6'2"

    Stack629 mm
    Reach487 mm
  4. S55'10"–6'4"

    Stack638 mm
    Reach511 mm

How neighboring sizes compare

If two sizes both fit, compare reach and standover rather than assuming the larger size is more comfortable.

How to measure a bike frame
  1. S2 → S3+4 mm+27 mm—
  2. S3 → S4+9 mm+23 mm—
  3. S4 → S5+9 mm+24 mm—

Enduro against the Stumpjumper 15

Both frames use S-Sizing. Specialized publishes no standover for the Enduro, so that figure stays out.

Difference reads Enduro Comp minus Stumpjumper 15 Comp Alloy.

Stack
Enduro Comp: 620 mm
Stumpjumper 15 Comp Alloy: 627 mm
Difference: -7 mm
Reach
Enduro Comp: 464 mm
Stumpjumper 15 Comp Alloy: 450 mm
Difference: +14 mm

The Enduro frame on its own

Specialized also sells the frame with a shock and no build kit. It publishes the same geometry table.

If you are between sizes

175 cm sits in S3 and S4

S3 covers 165–180 cm and S4 starts at 173 cm. S4 adds 9 mm of stack and 23 mm of reach, and Specialized publishes no standover for either frame.

S2 to S3 adds the largest reach step

That step adds 27 mm of reach, so the smallest two sizes do not step evenly.

Every step adds more reach than stack

Reach grows 23–27 mm per step while stack grows 4–9 mm, so pick the size by cockpit length.

Beyond this model

Same height, other Specialized mountain bikes

This page answers the Enduro size. The calculator checks your height and inseam against every Specialized mountain model we cover, so you can see whether another frame fits you better.

Compare other models

Sizing notes

Why height alone is not enough

Riders with the same height can need different sizes because inseam, torso length, flexibility, and preferred handling differ.

3 checks

  1. Reach grows 74 mm from S2 to S5 while stack climbs 22 mm, so the frame lengthens more than three times as fast as the front end rises.

  2. Specialized publishes no standover for the Enduro, so this page cannot turn an inseam into a clearance number. Ask a shop to measure the frame you plan to buy.

  3. The ranges overlap: 175 cm sits in S3 (165–180 cm) and S4 (173–188 cm), and the finder names the smaller covering size first.

Sources

Confirm the exact bike after you have a starting size

Every number on this page comes from the sources below. Check the exact model year there before you buy.

Data reviewed:

Compare

Compare before buying

A size label does not mean the same thing across brands. Compare published geometry before you choose.

Related guides

More Specialized and mountain sizing

Once you have a starting size, compare this frame against the Specialized chart and the mountain guide.

Specialized bike size chart

Compare Enduro against broader Specialized size guidance.

Read

Mountain bike size chart

Check mountain sizing by height and inseam before choosing a frame.

Read

Questions

Enduro size chart FAQ

Short answers for Specialized Enduro sizing.

What size Specialized Enduro should I ride?

Start with the S-Sizing range Specialized publishes. S2 covers 158–173 cm, S3 165–180 cm, S4 173–188 cm, and S5 178–193 cm.

What size Enduro fits a 175 cm rider?

175 cm sits in both S3 and S4. S3 carries 620 mm of stack and 464 mm of reach. S4 carries 629 mm and 487 mm, so the larger frame puts the bars 9 mm higher and 23 mm further out.

Does Specialized publish standover for the Enduro?

No. The Enduro geometry table lists stack, reach, wheelbase, and chainstay, but no stand over height. This page leaves the column at a dash rather than estimating it from another model.

How does the Enduro geometry compare with the Stumpjumper 15?

The Enduro S3 carries 620 mm of stack and 464 mm of reach. The Stumpjumper 15 S3 carries 627 mm and 450 mm, so the Enduro reaches 14 mm further at the same label. The S3 range is 165–180 cm on both charts, so compare the geometry, not the label.

How tall is an Enduro S5 for?

Specialized publishes 178–193 cm for S5, which is 5'10"–6'4". It carries 638 mm of stack and 511 mm of reach, the longest reach in the table.

Does the Enduro come as a frameset?

Yes. The S-Works Enduro Frameset publishes the same S2 to S5 table, with 616 mm of stack at S2, so the fit matches the complete builds.

Which Enduro builds share this size table?

Enduro Comp and Enduro Pro publish the same S2 to S5 stack and reach. The S-Works Enduro Frameset publishes the same geometry and ships without the build kit.