Crank Length Calculator
An 84 cm inseam suggests 168.0–176.4 mm, and the stock lengths inside that range are 170, 172.5, 175 mm.
- 20–21% of inseam
- Stock lengths, not custom cranks
- Road and gravel riding
- 84 cm inseam
- 168.0–176.4 mm
- 70 cm inseam
- 140.0–147.0 mm
- 90 cm inseam
- 180.0–189.0 mm
Change a number, read the answer
No submit button. The answer updates as you type.
A 84.0 centimeter inseam gives 168.0 to 176.4 millimeters. Stock lengths inside the range: 170 mm, 172.5 mm, 175 mm.
Starting range
168.0–176.4mm
- Stock lengths inside
- 170 mm, 172.5 mm, 175 mm
- Ratio used
- 20–21% of inseam
- Inseam used
- 84.0 cm
- Stock lengths sold
- 160, 165, 170, 172.5, 175, 180
The range covers road and gravel riding. Mountain, track and BMX riders use other ratios, so treat this as a starting point to experiment from.
How the range is built
Two multiplications and one filter. The range is a place to start, not a prescription.
- 1
Measure the inner leg
Stand barefoot, pull a book up into the crotch, and measure from the floor to the top of the book. Use the same inseam you would give a bike fitter.
- 2
Multiply by 0.2 and 0.21
84 cm × 0.2 = 168.0 mm, and 84 cm × 0.21 = 176.4 mm.
- 3
Pick a stock length inside the range
170 mm, 172.5 mm, 175 mm sit inside this range. When no stock length fits, the calculator names the nearest one.
Mountain, track and BMX riders use other ratios. The source article says the ratio is a place to start experimenting, not a measurement of the right answer.
Crank length by inseam
The range for common inseams, with the stock lengths that fall inside it.
| Inseam | Range | Stock length to try |
|---|---|---|
| 70 cm | 140.0–147.0 mm | 160 (nearest) |
| 75 cm | 150.0–157.5 mm | 160 (nearest) |
| 80 cm | 160.0–168.0 mm | 160, 165 |
| 84 cm | 168.0–176.4 mm | 170, 172.5, 175 |
| 90 cm | 180.0–189.0 mm | 180 |
| 95 cm | 190.0–199.5 mm | 180 (nearest) |
| 100 cm | 200.0–210.0 mm | 180 (nearest) |
Shops stock 165, 170, 172.5, 175 mm most often; 160 and 180 mm exist but are less common.
Questions riders ask
What crank length do professional riders use?
The article puts the Tour de France median in the 20–21% range of inner leg length. An 84 cm inseam maps to 168.0–176.4 mm.
Should I ride shorter cranks?
The source notes a drift toward the shorter end of the range, not a new rule. A shorter crank opens the hip angle and raises the saddle; a longer one adds leverage. Pick a stock length, then change one thing at a time.
Where does the pedal sit with a longer crank?
The 0.883 saddle rule runs to the bottom bracket, so crank length does not move it. It moves the pedal: a 175 mm crank puts the bottom of the stroke 5 mm lower than a 170 mm crank.
Why 20–21% of inseam?
It is the ratio the article reports for professional riders, not a standard. Treat it as the middle of the market and adjust from there for hip comfort and pedal clearance.
Where the numbers come from
- Lennard Zinn: Proportional crank length and frame design
Gives the 20–21% starting ratio and the frame changes that follow from it.
Checked 2026-11-18.How we check numbers
Use it with
- Saddle height calculatorSet the saddle after the crank length is fixed.
- Gear ratio calculatorCrank length changes leverage, not the gear ratio.
- Tire pressure calculatorThe other number that changes how the bike feels.
- Bike size calculatorFrame size first, then crank length.
- Geometry comparisonCheck bottom bracket height before a long crank.