Bike Tire Pressure Calculator
An 80 kg rider and bike on 28 mm tires get 74 psi at the rear and 61 psi at the front with a 45/55 weight split. Change the weight, the width or the bike and read both wheels.
- 15% tire-drop chart, not a sidewall maximum
- Front and rear calculated separately
- Answers in psi and bar
- 80 kg · 28 mm · randonneur
- 61 / 74 psi
- 80 kg · 25 mm · racing
- 63 / 94 psi
- 80 kg · 37 mm · randonneur
- 36 / 44 psi
Front / rear psi.
Change a number, read the answer
No submit button. The answer updates as you type.
Front 61 psi, rear 74 psi for 80 kilograms on 28 millimeter tires.
Rear tire
74psi · 5.1 bar
- Front tire
- 61 psi · 4.2 bar
- Front wheel load
- 36.0 kg
- Rear wheel load
- 44.0 kg
- Tire width
- 28 mm
Pressures hold for a 15% tire drop and stop at 30–150 psi. Check the maximum printed on your rim and tire before you inflate.
How the pressures are built
Berto measured how far a tire squashes under load. The chart turns a 15% drop into a pressure for each tire width, then the wheel load scales it.
- 1
Split the weight between the wheels
The chart's article gives 40/60 for a racing bike, 45/55 for a randonneur bike and 35/65 for a city bike. An 80 kg system on a randonneur bike puts 36 kg on the front and 44 kg on the rear.
- 2
Read the pressure for the tire width
At a 45 kg wheel load the chart asks for 76 psi on a 28 mm tire. Widths between two printed widths are read on the curve between them.
- 3
Scale to your wheel load
The chart's lines rise in a straight line with load, so 44 kg scales to 74 psi at the rear and 36 kg to 61 psi at the front.
The chart describes 1990s tires at a 15% drop. The answer stops at the calculator's 30–150 psi limit, not at a rim or tire maximum.
Pressure by tire width and wheel load
The chart this calculator is built on, scaled to four wheel loads. Read the line for your tire width, then the column for the load on that wheel.
| Tire width | 35 kg | 45 kg | 55 kg | 65 kg |
|---|---|---|---|---|
| 20 mm | 97 psi | 125 psi | 150 psi (limit) | 150 psi (limit) |
| 23 mm | 82 psi | 106 psi | 130 psi | 150 psi (limit) |
| 25 mm | 68 psi | 88 psi | 108 psi | 127 psi |
| 28 mm | 59 psi | 76 psi | 93 psi | 110 psi |
| 32 mm | 47 psi | 60 psi | 73 psi | 87 psi |
| 37 mm | 35 psi | 45 psi | 55 psi | 65 psi |
The 45 kg column is the chart's printed line. Wider tires than 37 mm use that width's value, because the chart stops there. "Limit" marks a cell held at the calculator's 30–150 psi bound.
Questions riders ask
What pressure should I run in 28 mm tires?
At 80 kg total with a 45/55 split: 61 psi front and 74 psi rear. A racing bike puts more weight on the rear, so the same tires take 81 psi there.
Why is the front pressure lower?
The chart's splits put less weight on the front: 40% on a racing bike, 45% on a randonneur bike, 35% on a city bike. Less load needs less pressure for the same 15% drop.
Does the 15% drop chart cover gravel tires?
The printed widths stop at 37 mm, so a wider gravel tire uses that width. Bicycle Quarterly suggests dropping pressure further on rough roads, where a lower pressure rolls faster.
Should I run lower pressure with tubeless tires?
The chart does not model tubeless setups or rim width. Use its answer as a starting point, check the maximum printed on the rim and the tire, then test one 5 psi step at a time.
Where the numbers come from
- Bicycle Quarterly: Optimizing your tire pressure for your weight
The 15% tire-drop chart and the 45 kg line used here.
- Bicycle Quarterly: Tire pressure take-home
Explains the chart, the weight splits and where the 15% figure stops working.
Checked 2026-11-18.How we check numbers
Use it with
- Gear ratio calculatorGearing and pressure are the two settings you change most.
- Saddle height calculatorSet the saddle before you tune pressure.
- Crank length calculatorCrank length sets the pedal circle.
- Bike size calculatorFrame size decides the tire clearance you can run.
- Bike size chartHeight and inseam ranges for every bike type.