Bike Gear Ratio Calculator
A 4.55 ratio moves the bike 9.68 m for every crank turn, which is 52.3 km/h at 90 rpm. Change the chainring, the cog or the wheel and read the new answer.
- Ratio, development and gear inches
- Nominal circumference from the ETRTO rim size
- Speed at the cadence you ride
- 50 × 11 at 90 rpm
- 52.3 km/h
- 34 × 34
- 1.00 ratio
- 700 × 25 → 28
- +0.9% per turn
Change a number, read the answer
No submit button. The answer updates as you type.
50 by 11 gives a 4.55 ratio and 52.3 kilometers per hour at 90 rpm.
Gear ratio
4.5550 ÷ 11
- Meters per turn
- 9.68 m
- Gear inches
- 121.3
- Speed at 90 rpm
- 52.3 km/h
- Wheel circumference
- 2,130 mm
Circumference is nominal: the ETRTO bead seat diameter plus twice the printed tire width. A mounted tire measures about 15 mm shorter around the circle.
How the numbers are built
One division and two multiplications. Nothing is looked up, so the same chainring and cog answer the same on every bike.
- 1
Divide the chainring by the cog
50 ÷ 11 = 4.55. One turn of the crank turns the rear wheel 4.55 times.
- 2
Multiply by the wheel's circumference
A 700 × 28 tire has a nominal circumference of 2,130 mm, so one crank turn covers 2,130 mm × 4.5455 ≈ 9.68 m.
- 3
Multiply by cadence for speed
At 90 rpm the wheel covers 9.68 m 90 times a minute: 52.3 km/h.
Gear inches are the ratio times the wheel diameter in inches. 700 × 28 has a nominal diameter of 26.7 in, so 50/11 is 121.3 gear inches. The 700 × 28 tire adds 0.9% circumference over 700 × 25 at the same ratio.
What common combinations do
A 50/34 crankset with an 11–28 cassette, measured on a 700 × 28 tire at 90 rpm. Read the ratio first, then the meters and the speed.
| Chainring | Cog | Ratio | Meters per turn | Gear inches | Speed at 90 rpm |
|---|---|---|---|---|---|
| 50T | 11T | 4.55 | 9.68 m | 121.3 | 52.3 km/h |
| 50T | 13T | 3.85 | 8.19 m | 102.7 | 44.2 km/h |
| 50T | 15T | 3.33 | 7.10 m | 89.0 | 38.3 km/h |
| 50T | 17T | 2.94 | 6.26 m | 78.5 | 33.8 km/h |
| 50T | 19T | 2.63 | 5.61 m | 70.2 | 30.3 km/h |
| 50T | 21T | 2.38 | 5.07 m | 63.6 | 27.4 km/h |
| 50T | 24T | 2.08 | 4.44 m | 55.6 | 24.0 km/h |
| 50T | 28T | 1.79 | 3.80 m | 47.7 | 20.5 km/h |
| 34T | 11T | 3.09 | 6.58 m | 82.5 | 35.6 km/h |
| 34T | 13T | 2.62 | 5.57 m | 69.8 | 30.1 km/h |
| 34T | 15T | 2.27 | 4.83 m | 60.5 | 26.1 km/h |
| 34T | 17T | 2.00 | 4.26 m | 53.4 | 23.0 km/h |
| 34T | 19T | 1.79 | 3.81 m | 47.8 | 20.6 km/h |
| 34T | 21T | 1.62 | 3.45 m | 43.2 | 18.6 km/h |
| 34T | 24T | 1.42 | 3.02 m | 37.8 | 16.3 km/h |
| 34T | 28T | 1.21 | 2.59 m | 32.4 | 14.0 km/h |
Wheel 700 × 28 and cadence 90 rpm. Change either in the tool above and every number scales with it.
Questions riders ask
What is a good gear ratio for a road bike?
Road bikes run from about 1.21 for a 34/28 climbing gear to 4.55 for 50/11. The ratio says how hard the gear is; the wheel decides how far each turn travels.
How fast is 50 × 11 at 90 rpm?
52.3 km/h on a 700 × 28 tire. Spin the same gear at 100 rpm and the speed rises to 58.1 km/h.
Does wheel size change the gear ratio?
No. The ratio counts teeth only. A larger wheel raises the distance per turn: 700 × 28 covers 0.9% more ground than 700 × 25 at the same ratio.
What are gear inches?
The ratio times the nominal wheel diameter in inches. 50/11 on a 700 × 28 tire is 121.3 gear inches, a number track and touring riders use to compare gears across wheel sizes.
Where the numbers come from
- Sheldon Brown: Tire sizing systems
Bead seat diameters (622 for 700C) and why a nominal circumference runs a little long.
- Sheldon Brown: Gain ratios and gear inches
How gear inches and gain ratios compare gears across wheel sizes.
Checked 2026-11-18.How we check numbers
Use it with
- Saddle height calculatorSet the saddle from your inseam before you change gears.
- Crank length calculatorCrank length changes the leverage behind every gear.
- Tire pressure calculatorPressure changes rolling resistance, not the ratio.
- Bike size calculatorFrame size first, gearing second.
- Geometry comparisonCompare stack and reach across models.