Saddle Height Calculator
An 84 cm inseam puts the saddle 742 mm above the bottom bracket with the 0.883 multiplier. Type your inseam in centimeters or inches and read the height.
- 0.883 multiplier, the figure Giant prints
- Centimeters or inches
- Bottom bracket to saddle top
- 84 cm inseam
- 742 mm
- 80 cm inseam
- 706 mm
- 90 cm inseam
- 795 mm
Change a number, read the answer
No submit button. The answer updates as you type.
Saddle height 742 millimeters for a 84.0 centimeter inseam.
Saddle height, bottom bracket to saddle top
742mm
- In centimeters
- 74.2 cm
- In inches
- 29.2 in
- Inseam used
- 84.0 cm
- Multiplier
- 0.883
Measure barefoot, with a book pulled up into the crotch, and keep the book level. The answer runs from the center of the bottom bracket to the top of the saddle.
How the height is built
One measurement and one multiplication. The result runs along the seat tube, not straight up from the floor.
- 1
Measure the inseam
Stand barefoot against a wall. Pull a book up into the crotch, keep its top edge level, and mark the wall. Measure from the floor to the mark.
- 2
Multiply by 0.883
84 cm × 0.883 = 742 mm. The multiplier comes from Giant's saddle-adjustment guide.
- 3
Measure the bike along the seat tube
Run the tape from the centre of the bottom bracket to the top of the saddle, following the tube. That distance is 742 mm, or 29.2 in.
Saddle rail height, shoe stack and pedal thickness move the contact point a few millimeters. Set the number, ride, and adjust in 5 mm steps.
Saddle height by inseam
The same multiplication for common inseams. Inches are rounded to one decimal place.
| Inseam | Saddle height | In inches |
|---|---|---|
| 70 cm | 618 mm | 24.3 in |
| 72 cm | 636 mm | 25.0 in |
| 74 cm | 653 mm | 25.7 in |
| 76 cm | 671 mm | 26.4 in |
| 78 cm | 689 mm | 27.1 in |
| 80 cm | 706 mm | 27.8 in |
| 82 cm | 724 mm | 28.5 in |
| 84 cm | 742 mm | 29.2 in |
| 86 cm | 759 mm | 29.9 in |
| 88 cm | 777 mm | 30.6 in |
| 90 cm | 795 mm | 31.3 in |
Measure the inseam the same way the tool asks for it: barefoot, floor to crotch, book level.
Questions riders ask
Is the 0.883 method accurate?
It is a starting point, not a fit. Giant prints it beside the heel-on-pedal check: with the heel on the pedal at the bottom, the leg should be straight. Use both, then adjust from the saddle.
Do I measure the inseam barefoot?
Yes. Measure barefoot, or in the socks you ride in, with the book level and firm against the crotch. A trouser inseam reads shorter and gives a saddle that sits too low.
Does crank length change saddle height?
The 0.883 figure stops at the bottom bracket, so it does not include the crank. A 172.5 mm crank puts the pedal 172.5 mm from the centre; a longer crank leaves the saddle-to-pedal distance shorter at the bottom of the stroke.
Why is my saddle height different from the shop's?
Saddle rail height, shoe stack and pedal thickness all move the contact point. Measure to the same reference every time: centre of the bottom bracket to the top of the saddle, along the seat tube.
Where the numbers come from
- Giant: How to adjust the saddle on your bike
Prints the heel-pedal method and the 0.883 multiplier used here.
Checked 2026-11-18.How we check numbers
Use it with
- Crank length calculatorCrank length sets the bottom of the pedal stroke.
- Gear ratio calculatorCheck the gears that sit under the new saddle height.
- Tire pressure calculatorPressure and saddle height are the two fit settings you feel first.
- Bike size calculatorFrame size decides whether the saddle can reach.
- How to measure a bike frameThe same tape, on the frame.