Free tool · 43 brand charts

Bike Size Calculator

Height and inseam in, a starting frame size out. The answer comes from the published chart for your bike type and brand, then from the geometry of the exact model when you pick one.

  • Height in cm or ft/in
  • Inseam, measured or estimated
  • Bike type, brand and model

What the result gives you

  • Recommended size

    The label a published chart puts your measurements in.

  • Also consider

    The next size up or down when the ranges overlap.

  • Height range check

    Your height shown inside the range the chart covers.

  • Brand comparison

    The same measurements checked against other brand charts.

brands with a size chart
43
models listed
317
model size charts
47
bike categories
5
Find your bike size
Three steps: measurements, bike, riding position.
Your measurements

1Your measurements

Height

ft
in

Inseamoptional

in
Your bike

2Your bike

Bike type

Brand

Optional. Pick the exact model to see its bar height and handlebar reach. Your size still comes from the published chart ranges.

Riding position

3Riding position

Height and inseamPublished chartsNo sign-up

Measuring inseam

Bike inseam is measured from the floor to your crotch in a riding stance, not the inside leg of your pants. Being 2 cm out usually moves the answer by one size.

Your result

Your size appears here

Add your measurements and pick a bike type. The answer compares your height and inseam against published size ranges.

What you entered

Height
5'10" (178 cm)
Inseam
32 in (81 cm)
Bike type
Mountain
Brand
Not sure
Riding position
Balanced
  • A main size and the next size up or down
  • Your height shown inside the chart's range
  • The same measurements in other brand charts

Need measurements first? Read how to measure height and inseam.

How the answer is built

Height sets the range. Inseam and geometry explain the fit.

Every answer names the chart it came from and the numbers that decided it.

The size each bike type gives for your height

The result changes with your height, and the label changes with the bike type. Find your band, then open the chart for the bike you are buying and confirm the size there.

5'1"–5'5" (155–164 cm)

Road
48–50 cm
Gravel
XS
Mountain
XS–S
Hybrid
S

5'5"–5'10" (165–177 cm)

Road
52–54 cm
Gravel
S–M
Mountain
M
Hybrid
M

5'10"–6'1" (178–186 cm)

Road
56–58 cm
Gravel
L
Mountain
L
Hybrid
L

6'2"–6'8" (187–204 cm)

Road
61 cm
Gravel
XL
Mountain
XL–XXL
Hybrid
XL–XXL

Before you calculate

Measure once, calculate once.

Two numbers make the recommendation useful. Everything else is optional.

  1. 01

    Height without shoes

    Stand tall against a wall and mark the crown of your head. Height sets the first size range.

  2. 02

    Inseam in a riding stance

    Floor to crotch, not the inside leg of your pants. Inseam confirms clearance and standover.

  3. 03

    No inseam? Estimate it

    Turn on the estimate switch and the calculator works out your inseam from height, then marks the answer as an estimate.

Measuring in feet and inches? The calculator converts both ways, so 5'10" and 178 cm return the same size.Full measurement guide

Height and inseam

Height

Stand against a wall without shoes, look straight ahead, and mark the crown of your head. Measure floor to mark in centimeters, then keep the number to the nearest half centimeter.

Inseam

Bike inseam is floor to crotch in a riding stance, not the tag inside your pants. Straddle a broomstick, lift it until it sits firmly, and measure the stick's height from the floor.

Next step

Take the answer to the chart.

Once you have a size, open the chart for your bike type or brand and confirm the label before you buy.

Browse all brands

Fit tools

Set the rest of the fit.

Frame size is the first of five settings. These four calculators answer the rest from the same measurements.

Before you buy

A size is a shortlist. Four checks make it a purchase.

The calculator returns one size and the runner-up. These are the numbers that separate the two on the frame you are actually buying.

  1. 01Standover clearance

    Stand flat-footed over the top tube. If the frame touches you, that size is too tall no matter what the chart says.

  2. 02Stack and reach

    Compare bar height and handlebar reach on the model you are buying, not against another brand's label.

  3. 03The chart for the right year

    Brands refresh geometry by model year, so confirm the table that matches the bike in front of you.

  4. 04A test ride or a fit

    Twenty minutes on the frame beats any size chart on paper. A fitter can adjust the last few millimeters after purchase.

FAQ

Calculator questions, answered.

Short answers for riders who already have a number and want to sanity-check it.

Back to the calculator
Can I calculate bike size without inseam?

Yes. Turn on the inseam estimate and the calculator works it out from your height. If standover clearance matters, measure your real inseam before you buy.

How accurate is the calculator result?

It narrows the size ranges a brand publishes; it cannot feel the bike for you. Test ride the frame, or book a bike fit, when you are between two sizes or comparing two models.

Why do brand and model matter?

Brands use different labels and geometry. A medium road bike from one brand can overlap with a 54 or M/L from another, so the answer changes when you switch brand or bike type.

What should I check after the calculator result?

Confirm standover, stack, reach, and the brand's published chart for the exact model and year you plan to buy. Those numbers decide the fit once two sizes both look right.

Is the calculator free to use?

Yes. No account, no email, no payment. The answer stays on screen while you change bike type, brand or riding position.

Change one answer, watch the size move.

Switch the bike type, brand or riding position and the answer changes with it. When two sizes are close, clearance and your riding position decide which one to take.